High-Speed Microcentrifuge—Touch
Product Code : EL-LC-10977
Last updated: 6 October 2026
Quick answer: A compact touchscreen microcentrifuge running 1,000 to 13,500 rpm to a maximum 16,800 g, taking 24 x 1.5/2.0 mL microtubes and 2 PCR strips, storing up to 9 speed and time profiles. Weight 6.4 kg.
The feature that suits a teaching laboratory here is the stored profile. Nine speed and time profiles can be saved and recalled from the colour touch screen, so a class protocol becomes a single selection rather than two settings a student can mis-enter. The listing describes the screen as making it easy to adjust settings and monitor operation.
Capacity covers both tube formats a molecular biology class uses: 24 x 1.5/2.0 mL microtubes and 2 PCR strips, which is 16 x 0.2 mL tubes. The speed range is 1,000 to 13,500 rpm with a maximum 16,800 g, and operation is described as whisper quiet. At 6.4 kg and 23 x 30.5 x 19.7 cm it is genuinely portable between rooms, which the larger instruments in this family are not.
Note the minimum speed: 1,000 rpm, against 200 rpm on the benchtop model in this family. For gentle pelleting of cells or a short low-speed spin, that floor may be too high, so check your protocols against it.
One wording point on the source listing: the sentence describing the rotor is incomplete, reading that the unique accommodates standard microcentrifuge tubes, with the noun missing. The capacities quoted above come from the published specification table rather than that sentence.
Technical specifications
Specification | As published |
Product type | High-speed microcentrifuge, touchscreen |
Speed range | 1,000 to 13,500 rpm |
Maximum g-force | 16,800 x g |
Rotor capacity | 24 x 1.5/2.0 mL microtubes and 2 PCR strips (16 x 0.2 mL tubes) |
Control | Colour touch screen |
Stored profiles | Up to 9 speed and time profiles |
Timer | 1 to 99 min or continuous |
Electrical | 120 V AC, 60 Hz |
Dimensions | 23 x 30.5 x 19.7 cm |
Weight | 6.4 kg |
Supplied from | Ambala, Haryana, India |
This listing publishes a full specification. The electrical specification is 120 V AC at 60 Hz only, which is neither the Indian voltage nor the Indian frequency: ask specifically whether a 220 to 240 V, 50 Hz version exists before ordering, as a frequency-specific unit cannot simply be run through a transformer. The acceleration and braking behaviour and the noise level in dB are not stated.
Range and ordering
This item belongs to the Lab Centrifuges family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.