Mini Dry Bath
Product Code : EL-LWB-11105
Last updated: 6 October 2026
Quick answer: A compact dry bath holding fifteen 1.5 or 2.0 mL tubes, +5 to 100 degrees C, accuracy +/-0.5 degrees C and uniformity +/-0.2 degrees C, set by touch pad with a digital display. Runs on 100 or 240 V AC at 50/60 Hz.
A dry bath heats tubes in a metal block rather than water, which removes evaporation, contamination and the spill risk entirely. For a crowded bench or a protocol where water near the samples is unwelcome, that is the better choice, and it needs no filling or draining.
This one is genuinely small at 4 x 6 x 4-1/2 inches and 2 lb, with a block accommodating fifteen 1.5 or 2.0 mL tubes. The block is integral to the unit rather than interchangeable, which is a limitation against the Digital Dry Bath in this family, but it also means nothing further has to be bought before it works.
Control is by simple touch pad with a digital display, over a range of +5 to 100 degrees C in 0.1 degree increments, with accuracy of +/-0.5 degrees C and uniformity of +/-0.2 degrees C. The listing notes the unit maintains the set temperature automatically, so it can be left unattended during an incubation.
The power supply is 100 or 240 V AC at 50/60 Hz, which covers Indian mains as supplied. That makes this one of the few instruments in this range needing no voltage conversion, worth noting when comparing against the 115 V units alongside it.
Technical specifications
Specification | As published |
Product type | Dry bath incubator, compact, 15 tubes |
Block capacity | Fifteen 1.5 or 2.0 mL tubes |
Temperature range | +5 to 100 degrees C |
Temperature accuracy | +/-0.5 degrees C |
Temperature uniformity | +/-0.2 degrees C |
Temperature increment | 0.1 degrees C |
Control | Touch pad with digital display |
Power requirements | 100 or 240 V AC, 50/60 Hz |
Dimensions | 4 x 6 x 4-1/2 in |
Weight | 2 lb |
Supplied from | Ambala, Haryana, India |
This listing publishes a full specification and a 100 or 240 V input, so the unit suits Indian mains as supplied. Wattage, heat-up time, whether the block is interchangeable and whether a lid is supplied are not stated. Confirm these before ordering.
Range and ordering
This item belongs to the Lab Water Baths family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.