Mini Electrophoresis Power Supply
Product Code : EL-PS-10941
Last updated: 6 October 2026
Quick answer: A compact power supply running two gels at the same or different voltages, with output voltages of 15, 75 or 150 V, maximum current 350 mA and maximum power 52.5 W, accepting 120 to 240 V AC at 50/60 Hz.
This is the only supply in the family with a full published electrical specification, and it is the one to compare the others against. Output voltages are 15, 75 or 150 V, selected by slide switch; maximum current is 350 mA and maximum power 52.5 W; and the power requirement is 120 to 240 V AC at 50 or 60 Hz, which means it works in India and in most export markets without a different version.
Two output jack sets let two gels run at the same or different voltages. Operating instructions are printed on the front panel, which is the right place for them in a teaching laboratory where the manual goes missing. A red overload light indicates when current exceeds 350 mA, and the grounded cord is detachable. The fuse is glass encased.
Dimensions are 10.2 cm deep by 12.7 cm wide by 7 cm high and the weight is 1-1/2 lb. The 15 V setting is low enough for slow overnight-style runs and the 150 V for fast separations, so the three fixed steps cover most teaching work, though they are steps rather than continuous adjustment.
Technical specifications
Specification | As published |
Product type | Electrophoresis power supply, compact |
Output voltages | 15, 75 or 150 V |
Maximum current | 350 mA |
Maximum power | 52.5 W |
Output jack sets | Two |
Power requirements | 120 to 240 V AC, 50/60 Hz |
Overload indication | Red light when current exceeds 350 mA |
Fuse | Glass encased |
Mains cord | Detachable, grounded |
Controls | Slide switches; operating instructions printed on the front panel |
Dimensions | 10.2 cm D x 12.7 cm W x 7 cm H |
Weight | 1-1/2 lb |
Supplied from | Ambala, Haryana, India |
This listing publishes a fuller electrical specification than the other supplies in this family. The fuse rating and the regulation mode, constant voltage or constant current, are not stated. Confirm these before ordering if the supply will be used for anything beyond routine agarose work.
Range and ordering
This item belongs to the Power Supplies family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.