Gravity Convection Oven
Product Code : EL-IO-10988
Last updated: 6 October 2026
Quick answer: A 0.7 cubic foot gravity convection laboratory oven reaching a maximum 225 degrees C (437 degrees F), with a 12 x 10 x 10 inch aluminised steel chamber, double-wall steel cabinet and two adjustable shelves. 600 W.
The distinction from the incubators in this family is temperature: this oven reaches 225 degrees C against their 60 degree ceiling, which puts drying, sterilising, heat treating and annealing within range rather than just culture work. The listing names drying, baking, sterilising, evaporating, heat treating, annealing and testing as intended uses.
Gravity convection means air circulates by natural buoyancy rather than a fan. That makes it quieter and avoids disturbing light samples such as powders or filter papers, at the cost of slower and less even heating than a forced-air oven. For drying glassware and general school use that trade is usually right.
Construction is appropriate for the temperature: a corrosion-resistant aluminised steel interior, heavy double-wall steel cabinet, 1 inch of high-density mineral wool insulating the work space from the outer cabinet, and a high-impact thermoplastic door handle. The exterior is painted light grey with a scratch-resistant hammered finish. Two adjustable shelves are supplied.
The chamber is 12 x 10 x 10 inches, 0.7 cubic feet, overall 14 x 17 x 12 inches at 44 lb. Electrical rating is 120 V, 5.22 A, 600 W.
At 225 degrees C the exterior and the load will both be hot enough to burn. Confirm that heat-resistant gloves and a safe set-down area are available, and note that temperature uniformity and control accuracy are not published, so this is not an oven to rely on for a validated sterilisation cycle without asking for those figures.
Technical specifications
Specification | As published |
Product type | Gravity convection laboratory oven, 0.7 cu ft |
Maximum temperature | 225 degrees C (437 degrees F) |
Capacity | 0.7 cu ft |
Inside dimensions | 12 x 10 x 10 in |
Outside dimensions | 14 x 17 x 12 in |
Air circulation | Gravity convection |
Interior | Corrosion-resistant aluminised steel |
Cabinet | Heavy steel, double-wall construction |
Insulation | 1 in high-density mineral wool |
Door handle | High-impact thermoplastic |
Exterior finish | Painted light grey, scratch-resistant hammered finish |
Shelves | Two, adjustable |
Electrical | 120 V, 5.22 A, 600 W |
Weight | 44 lb |
Supplied from | Ambala, Haryana, India |
This listing publishes a full specification. Temperature uniformity and control accuracy are not stated, so do not rely on this oven for a validated sterilisation cycle without obtaining those figures. Confirm the supply voltage before ordering: the published rating is 120 V, which is not the Indian mains standard; ask whether a 220 to 240 V, 50 Hz version is available.
Range and ordering
This item belongs to the Incubators and Ovens family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.