Incubator, Lab
Product Code : EL-IO-10987
Last updated: 6 October 2026
Quick answer: A compact 0.7 cubic foot laboratory incubator with a 12 x 10 x 10 inch aluminium chamber, reaching a maximum 62 degrees C and holding temperature to +/-half a degree, with tinted see-through acrylic doors and a thermometer included.
The see-through tinted acrylic doors are the feature that matters most in teaching use: a class can watch plates or cultures across several days without opening the door, which is both the commonest cause of a temperature excursion and the commonest route to contamination.
The chamber is 12 x 10 x 10 inches, 0.7 cubic feet, in durable aluminium for easy cleaning, with a chrome-plated adjustable shelf and a fixed bottom shelf. The exterior is cold-rolled steel in a baked-on enamel finish, insulated with fibreglass, and the overall size is 13 x 15 x 10-3/4 inches at 26 lb, so it sits on a bench or a shelf. A laboratory thermometer is included.
The maximum temperature is 62 degrees C and the heat controller maintains temperature to within half a degree. That covers 37 degree bacterial culture and the usual drying and warming tasks, but it is a heat-only incubator with no cooling, so set points below room temperature are not available.
The power requirement is 115 V at 0.96 A. Note that the listing describes this as the 0.7 cubic foot capacity model, implying other sizes exist in the range; ask what else is available if this chamber is too small.
Technical specifications
Specification | As published |
Product type | Laboratory incubator, 0.7 cu ft |
Capacity | 0.7 cu ft |
Chamber dimensions | 12 x 10 x 10 in |
Overall dimensions | 13 x 15 x 10-3/4 in |
Maximum temperature | 62 degrees C |
Temperature control | Maintains to +/- half a degree |
Interior | Aluminium |
Exterior | Cold-rolled steel, baked-on enamel finish |
Insulation | Fibreglass |
Doors | See-through tinted acrylic |
Shelves | One chrome-plated adjustable shelf and one fixed bottom shelf |
Supplied with | Laboratory thermometer |
Power requirements | 115 V, 0.96 A |
Weight | 26 lb |
Supplied from | Ambala, Haryana, India |
This listing publishes a full specification. Confirm the supply voltage before ordering: the published electrical specification is 115 V, which is not the Indian mains standard; ask whether a 220 to 240 V, 50 Hz version is available for your destination. Note the unit heats only, with no cooling, so set points below room temperature are not achievable. Temperature uniformity across the chamber, as distinct from control accuracy, is not stated. The listing refers to this as the 0.7 cu ft capacity model; ask what other sizes are available.
Range and ordering
This item belongs to the Incubators and Ovens family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.